Wednesday, this week, we got 5-6 inches of snow here at our house. The Seattle-Tacoma area was slammed with 5 to 12" of the cold white stuff. It brings this town to a standstill. Since it was treacherous to go out and I didn't need to, I made good use of the time, spending it up in my studio, sewing.
Then on Thursday, we got freezing rain on top of it.
Since I'm working on my Connecticut Winter Quilt, and I'm getting close to finishing the top, I naturally started thinking about the back. I knew I didn't want to use the leftover fabrics - then the back would be too much like the front. And, I really don't want to buy fabric for it, because all of these fabrics were purchased while on our trip to Connecticut last winter. That leaves just one option - dye my own! I love this idea.
As my mind wandered while piecing the many blocks into rows, I thought remembered ice dyeing.
I had done a little of that a while ago - and the fabrics where beautiful.
I started some fabric heating in some soda ash mixture.
Then I let it drip dry for a short while.
I got out a large tray and over that I put an old window screen, where I arrange the folded prepared fabric. I was thinking about using it as binding, so I folded it into strips, thinking that when cut on the diagonal for binding it would look very nice.
And then I headed out to get some of the 'local' ice.
Brrrrr. With bucket in hand, I smashed through the thick ice crust and broke some up and brought it in.
I had to break it up into even smaller pieces - it was soooo cold - and arrange it over the fabric.
Then sprinkle the dye over the ice...
And wait, and watch as it melts.....
....and drips dye onto the fabric beneath....
...and does weird and magical stuff....
...it is so beautiful to watch as it slowly melts....
Then, the next morning, the ice is all melted into the tray below and the fabric has absorbed the dyes.
The dye-design on the fabric is like none you'd get in a conventional way...
Here's some close-ups...
Beautiful and strange and so much fun.
This is so cool, Terry!
ReplyDeleteThank you so much--first of all you are a gifted writer, and secondly the images as the process unfolded were spectacular. I am going to attempt this with ice from my freezer. I froze some water in baking pans so I could chunk it up to resemble yours. Even have the same color dyes...fingers crossed! Thanks again!
ReplyDeleteThis is awesome! I was just wondering what type of dye you used and if you know if it would work with natural dye as well. Also, do you think that it would work on cotton knits and woven wools? Thanks!!
DeleteThis comment has been removed by the author.
Deletehello Terry,
Deletethis is so beautiful. What do you use to "fasten" the dye?I want to try it on viscose rayon for dress fabric and would not want it to fade after washes?
Thank you!
Lisa {south africa}
You need to mordant the fabric before dyeing.
DeleteSoak fabric in hot water/ soda ash mixture for minimum of 15 minutes. 30 minutes is best.
DeleteThen, wring out fabric best as possible.
I throw mine into washing machine on “drain /spin” cycle because the fabric should be damp, not dripping wet for dying.
The soda ash mixture is 1 cup per gallon of water.
I use mostly Dharma Fiber Reactive Priocion type dry pigments, and a few other brands. I have never dyed wool, but I would think it would work just beautifully on cotton knit. What a great idea for t-shirts! Have fun.
ReplyDeleteCan you tell me more about heating the fabric? Soda ash mixture? Thanks!
ReplyDeleteI just mixed the soda ash into the water, and heated the water up a little. Not to a boil, I didn't measure the temp, but it was too hot to put your hand into. Remove from heat, stir in the fabric and let it sit for a little while.
DeleteThanks for the great tips on snow/ice dyeing
ReplyDeleteAs we do not have great dumps of snow here in Australia I will have to try the freezer ice to dye my fabric Last year my group decided to have a dyeing day and the temperature was 44degree celcius about 110 F The fabrics dried way to fast and the water was hot without being heated We intend to have another go this Oct with a close eye on the weather
Cheers Anne
Those are the exact colors I am looking to do on someone's gift I would like to make! I can't quite see what colors you used for sure could you please tell me? :)
ReplyDeleteThank you
Trina
We just have a messy ,freezing ,couple of weeks of snow and ice and cold.
ReplyDeleteThis could make it seem worth while.
I love it. Last year I did some snowdyeing, and that was also beautiful. I think I will try your technique also, thank you very much for sharing this.
ReplyDeleteI tried on watercolour paper with acrylic inks. Waiting for the beautiful result.
ReplyDeleteWhat a wonderful idea...I'll have to try it next time we get snow, too.
DeleteWow! It's been -20 here so often this winter that I wish I had know about this technique. Looks beautiful!
ReplyDeleteThis is truly amazing. What is the formula for the soda ash mixture you pre-treated the fabric with? Also, is there a final step to set the dye? I'd really like to experiment with this process! Thank you so much for sharing
ReplyDeleteI just mixed about a 1/2 cup of soda ash into about a gallon and a half of water, and heated the water up a little. Not to a boil, I didn't measure the temp, but it was too hot to put your hand into. Remove from heat, stir in the fabric and let it sit for a little while.
ReplyDeleteIf you've never done this before what are the essential ingredients and tools? And do you have website reference where you can buy the dyes and tools etc.? I was also wondering if you need a specific type of fabric to make this work.
ReplyDeleteThere was an article in the issue of QUILTING ARTS Magazine about Ice Dyeing. That's the August/September 2011, Issue 52. I wrote a little more about it here: http://beforethedog.blogspot.com/2011/08/ice-dyeing.html
DeleteWow this is truly amazing
ReplyDeleteWhat colors did you use, this is really beautiful!
ReplyDeleteIt's been so long ago, I can't remember exactly what dyes I used on this batch. But, any combo that you like will work!
DeleteStunning...........What fun!!!!
ReplyDeleteThanks for sharing . I was just wondering about all this Michigan snow and ice that I can no longer tolerate. Now I just consider it another FREE ART SUPPLY
ReplyDeleteI was wondering does it work well on silk?
ReplyDeleteI have never dyed silk, so don't know much about the process, but I would think the general idea would work. You'll probably have to change the process, i.e. the mordant and how you finish it. Good luck.
ReplyDeleteCheck out the Dharma site. I think they have general directions for all types of dyeing. If I remember right, you use vinegar instead of soda ash, acid dyes, and steam when it's done to set the dye. Dharma should give you the proportions. Your piece is gorgeous, Terry. I live in Western NY with lots of snow, so I'll be trying it this winter.
Deletewhat all colors you used in this pic
ReplyDeleteMy daughter just sent me a link to this and..... GASP! These resulting colors and patterns are gorgeous!! I see doing this dying in our futures.
ReplyDeleteBeatiful...and awesome! I will practice
ReplyDeleteThanks to share
Love it !! I live in Bali no ice at all!
ReplyDeleteMy freezer is too small, pity.
I like your work, thanks sharing
Thanks for sharing. Your fabric is truly beautiful and I'm now inspired to have another go. My first efforts were not as good as yours.
ReplyDeleteBeautiful!
ReplyDeleteGRATA PELA SUA MARAVILHOSA PARTILHA, COM BOA VONTADE DE ENSINAR. OS TRABALHOS FICAM LINDÍSSIMOS.MUITO INTERESSANTE E MUITO BONITO.
ReplyDeleteonce the snow/ice melts, do you apply more snow or dye?
ReplyDeleteOnce the ice melts, the dye has been dispersed onto the fabric and you are done.
DeleteI do rust dying and would love to try out the ice dyes. The silks are treated with vinegar so I'm curious as to how the color dyes will act with it.
ReplyDeleteDoes the soda ash set the dye or do you need to do anything more?
ReplyDeleteThank you for sharing. I have done ice dyeing, too and I think the larger ice does a better job.
ReplyDeletehello !je n'ai pas compris pourquoi "you put an old window screen on this tray " ?why ?would you explain the usefulness of this fabric ? thank you from a french girl
Deletehello "bis "
Deletedid you put the old window sceen over the tray then the fabric then ice and the dyes ?thank you "bis "
for this wonderful idea !
Hello French Girl, the purpose of the screen is to hold the fabric above the melted ice water. If the fabric was in the water the dyes would melt all together and you would probably get mud. I have also used an old 'baby gate'. Anything that will allow the water to freely flow through and hold the fabric above the tray that catches the melting water will work.
ReplyDeleteAnd, after, you just hang your fabric to dry it ? The results are "merveilleuses et lumineuses". Many thanks for all your explications. I am french, too..
ReplyDeleteI treat it as you would any other dyed fabric. I usually rinse really well, then wash in the machine a time or two, with synthropol.
DeleteSome are asking about the colors: with ice dyeing (and you can use ice cubes
ReplyDeleteJust fine) you need to use "mixed" colors or they will not split If there is a code after the Procion MX color, like Red MX5B, DON'T use that color. It is made of one color molecule and will not split. You might get light and dark versions of the colors, but not the multi colors. Lynda Heinea has a cheap online Ice Dyeing class with a PDF of all colors and how they split. Also: don't need to really heat up the soda ash. Warm tap water in a gallon milk jug and shake to mix is fine. Good luck and nice post. JKF
Beautiful work! Am I right in thinking you have to have a dye that is mixed, i.e. not a single colour?
ReplyDeleteI used several different colors, all in the powder form. I hear the current method is to mix each color into a liquid and apply the different colors haphazardly to the ice. Good luck.
Delete